Encore ENLWI-G User's Guide download pdf (Page 8)

HARDWARE INSTALLATION

LED Indicator

LNK (Link)

The LNK indicator indicates green when the Wireless PCI Adapter is connected to

a network successfully. Otherwise the LNK indicator blinks green continuously

whiles the Wireless PCI Adapter is scanning the wireless devices or transmitting

data.

Check the installation

1. Shut down the computer, unplugs its power cord, and remove the chassis cover.

2. Insert the contact edge of the Wireless PCI Adapter into the connector of any

available PCI Bus Master Expansion slot. Press the card firmly into the connector

such that the card’s contacts are fully seated in the PCI slot connector.

3. Install the bracket screw and secure the card to the computer chassis.

4. Cover the computer’s chassis.

5. Switch computer power on. The computer will automatically activate the newly

installed driver and utility the Wireless PCI Adapter.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

No comments

Encore ENLWI-G User's Guide Page 8