Encore 24 PORTS NWAY SWITCHING HUB User Manual download pdf (Page 28)

Specifications are subject to change without notice.

8-4 Specifications 6222 User’s Manual

Calibration

Calibration interval ............................................................. 1 year

Contact Measurement Computing for information regarding calibration service.

Note: The above calibration information pertains to hardware calibration, not to be confused with “user” or “software”

calibration. When performing a “user” calibration via Encore (or other software) keep in mind that sample rate affects both

gain and offset of the hardware, and therefore any “user” calibration should be performed at the same sample rate that is

intended for measurements.

Accessories

TR-60U 24VDC @ 0.8A (max) universal power supply

CA-1 120V IEC AC Mains cable (US)

CA-216 220V IEC Mains Cable (EU)

CA-74-1 RJ12 Shielded Cable, 6-Conductor, Sync, 0.3m (1ft)

190658A-01 Stacking plate kit; includes:

2 stacking plates

8 screws (8-32x0.5in, Phillips Flat, 82 degree)

CN-271 Backshell connector kit; includes:

1 plastic backshell connector and

1 screw-terminal connector

HA-210-5-BK: Handle kit; Includes:

1 molded black plastic handle

2 screws (1/4-20x7/8in, Phillips Pan Head)

CA-192-7C Ethernet Crossover Cable, 2.133m (7ft)

2,3

CA-242 Ethernet Patch Cable, 0.457m (1.5ft)

CA-242-7 Ethernet Patch Cable, 2.133m (7ft)

Cable Notes:

Up to nine units can be synchronized. The total combined length of the SYNC cables is

not to exceed 2.438m (8 ft).

Ethernet cable length must be <3 m (9.8 ft) in order for the system to be CE Compliant.

An Ethernet crossover cable must be used when connecting a 6000 Series device directly

to the host PC.

1 2 ... 23 24 25 26 27 28

No comments

Encore 24 PORTS NWAY SWITCHING HUB User Manual Page 28