Encore ENUWI--XAN3 User Manual download pdf (Page 14)

h Profile: Enter a name for the profile; this does not need to be the same

as the SSID.

h SSID: Enter the SSID of the network or select one from the drop-down

list. The SSID is a unique name shared among all points in your wireless

network. The SSID must be identical for all points in the network, and is

case-sensitive.

h PSM: Select a power saving mode (PSM) option.

o CAM (Continuously Active Mode): Select this option if your

notebook is always connected to the power supply.

o PSM (Power Saving Mode): Select this option if your notebook

uses its battery power. This option minimizes the battery usage

while the network is idle.

h Network Type: Select Infrastructure from the drop-down list.

h TX Power: Select a transmit power from the drop-down list. If your

notebook is connected to external power then select 100% or auto, if

not, select one of the lower values for power saving.

h RTS Threshold: Place a check in this box if you would like to enable

RTS Threshold. Any packet in the RTS/CTS handshake larger than the

specified value (bytes) will be discarded.

h Fragment Threshold: Place a check in this box if you would like to

enable Fragment Threshold. Any packet larger than the specified value

(bytes) will be discarded.

h Click on the OK button to save the changes.

Ad-hoc Mode

This is the simplest network configuration with several computers equipped with

the wireless Network Interface Cards that form a wireless network whenever they

are within range of one another. In ad-hoc mode, each client is peer-to-peer,

would only have access to the resources of the other client and does not require

an access point. This is the easiest and least expensive way for the SOHO to set

up a wireless network.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Encore ENUWI--XAN3 User Manual Page 14