Encore ENUWI--XAN3 User Manual download pdf (Page 35)

h Profile: Enter a name for the profile; this does not need to be the same

as the SSID.

h SSID: Enter the SSID of the network or select one from the drop-down

list. The SSID is a unique name shared among all points in your wireless

network. The SSID must be identical for all points in the network, and is

case-sensitive.

h PSM: Select a power saving mode (PSM) option.

o CAM (Continuously Active Mode): Select this option if your

notebook is always connected to the power supply.

o PSM (Power Saving Mode): Select this option if your notebook

uses its battery power. This option minimizes the battery usage

while the network is idle.

h Network Type: Select Infrastructure from the drop-down list.

h TX Power: Select a transmit power from the drop-down list. If your

notebook is connected to external power then select 100% or auto, if

not, select one of the lower values for power saving.

h RTS Threshold: Place a check in this box if you would like to enable

RTS Threshold. Any packet in the RTS/CTS handshake larger than the

specified value (bytes) will be discarded.

h Fragment Threshold: Place a check in this box if you would like to

enable Fragment Threshold. Any packet larger than the specified value

(bytes) will be discarded.

h Click on the Apply button to save the changes.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

No comments

Encore ENUWI--XAN3 User Manual Page 35