E9 IN REV. A
17
2 Push the Valet switch 5times (holding in on the 5th push) until one long chirp is heard then release the valet
switch. You are now in the Alarm feature “C” programming mode.
3 Press and release the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp / LED
one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps / LED
four pulses
1
H2/13 Pink Wire
=
Two step door
unlock output
H2/13 Pink Wire
= Factory
Security Disarm
Signal Output
H2/13 Pink Wire
= Start Status
Output
(Shock Sensor
Bypass)
H2/13 Pink Wire =
Start Status
Output
(Shock Sensor
Bypass 20 SEC)
2
Brown / White
Wire = (-)
200mA Horn
Output
Brown / White
Wire = Factory
Security Rearm
Signal Output
3
Fahrenheit
display for
Temperature
Celsius display
For temperature
4
Override
Without
Password Pin
Code
Override With
Password Pin
Code
5
+
Black/Green
Wire Channel 4
Output =
Pulsed output
Black/Green
Wire Channel 4
Output =
Latched output
Black/Green
Wire Channel 4
Output =
Latched output
and reset with
ignition “on”
Black/Green
Wire Channel 4
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
6
+
Black / Red
Wire Channel 5
Output =
Pulse output
White/Red
Channel 5
Output =
Latched output
White/Red
Channel 5
Output =
Latched output
and reset with
ignition “on”
White/Red
Channel 5 Output
= Timer
programming (set
to any interval
between 1
second and 2
minutes.)
7 +
Black / Violet
Wire Channel 6
Output =
Pulse output
Black / Violet
Wire Channel 6
Output =
Latched output
Black / Violet
Wire Channel 6
Output =
Latched output
and reset with
ignition “on”
Black / Violet
Wire Channel 6
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
Channels 4 /5 /6 Timer Control Output Programming.
Enter:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 5 times (holding in on the 5th push) until one long chirp is heard then release the valet
switch. You are now in the Alarm feature ‘C’ programming mode.
Timer Program:
1. Press and release
and buttons together 4 times, [4] LED flash, [4] siren/horn chirps to indicate that you
are in features “Channel 4 Timer Programming mode”.
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals